SPS5710-2-LF3 Honeywell 电源模块 C300控制器的底板

SPS5710-2-LF3 Honeywell 电源模块 C300控制器的底板

C300控制器的底板。（C系列硬件都是由底板和模件两部分组成，模件是插在底板上，用螺栓固定）

底板上会有好多接口用于C300控制器与其它部分的连接。

模件

模件是控制部分的主体，内部有处理器，内存，内部检测等电路，控制部分的主要工作将在这里完成；模件上有LED灯和显示屏，在这里能获取到很多C300工作过程或故障中的各种信息

FTE网设备索引号

网络中C300区别于其它节点（服务器、操作站、其它C300）的标识，可以理解为C300的IP地址（C300和服务器、操作站等都在同一个FTE网络中，网络中各个节点之间靠IP来区分）

备用电池接口

用专用电缆连接备用电池，目的是当C300没电的时候保持C300内存RAM里的zui新组态策略不丢失。

SPS5710-2-LF3 Honeywell 电源模块 C300控制器的底板

Baseplate of the C300 controller. (The C series hardware is composed of two parts: the base plate and the module. The module is inserted into the base plate and fixed with bolts.)

There are several interfaces on the backboard for connecting the C300 controller to other parts.

module

Module is the main body of the control part, there are processors, memory, internal detection and other circuits, the main work of the control part will be completed here; There are LED lights and displays on the module, where you can get a lot of information about the working process or fault of the C300

FTE network device index number

The identification of C300 from other nodes (servers, operating stations, and other C300) in the network can be understood as the IP address of C300 (C300, server, operating station, etc., are in the same FTE network, and each node in the network is distinguished by IP).

Standby battery interface

The backup battery is connected with a dedicated cable to keep the latest configuration policies in the C300 RAM intact when the C300 is out of power.

SPS5710-2-LF3 Honeywell 电源模块 C300控制器的底板