PR6426010-100+CON021916-160 涡流信号转换器

PR6426010-100+CON021916-160 涡流信号转换器

GE DS200DTBDG1AAB 是通用电气（GE）马克五世系列驱动系统中的一个数字接触输出扩展模块。该模块主要用于扩展驱动器的数字输出功能，实现对外部设备的控制。

输入电压： 通常为 24V DC 或 110/220V AC，具体取决于您的驱动系统和应用环境。 
输出电流： 根据负载的不同，输出电流会有所差异。一般而言，每个输出通道的电流容量在几安培左右。 
输出类型： 数字输出，可驱动继电器、电磁阀等负载。 
触点形式： 常开、常闭或转换触点。 
响应时间： 毫秒级。 
隔离电压: 根据安全标准要求，提供足够的隔离电压。 
工作温度范围： 通常为 -20°C 至 +70°C。 
相对湿度： 5% 至 95%。 
安装方式：DIN 导轨安装。 
防护等级：IP20 或更高。 
认证：CE、UL 等。

PR6426010-100+CON021916-160 涡流信号转换器

The GE DS200DTBDG1AAB is a digital contact output expansion module in General Electric's (GE) Mark V series drive systems. The module is mainly used to expand the digital output function of the driver and realize the control of external devices.

Input voltage: Typically 24V DC or 110/220V AC, depending on your drive system and application environment.
Output current: Depending on the load, the output current will vary. In general, the current capacity of each output channel is around a few amps.
Output type: digital output, can drive relays, solenoid valves and other loads.
Contact form: normally open, normally closed or switch contact.
Response time: milliseconds.
Isolation voltage: Provide sufficient isolation voltage as required by safety standards.
Operating temperature range: usually -20°C to +70°C.
Relative humidity: 5% to 95%.
Mounting method: DIN rail mounting.
Protection level: IP20 or higher.
Certification: CE, UL, etc.

PR6426010-100+CON021916-160 涡流信号转换器