3500/42M 176449-02 4通道监测仪 输入来自邻近和地震传感器

3500/42M 176449-02 4通道监测仪 输入来自邻近和地震传感器

产品概述
3500/42M 176449-02 是一款四通道监测仪，由 Bently Nevada 公司生产，用于 Bently Nevada 3500 监测系统。它可以接受来自邻近和地震传感器的输入，并提供振动和位置测量以及条件信号分析。
产品特点
四通道输入： 3500/42M 176449-02 可以接受来自四个邻近或地震传感器的输入。
振动和位置测量： 该模块可以测量振动水平和位置，并提供有关机器状况的重要信息。
条件信号分析： 该模块可以分析来自传感器的信号，并识别潜在的故障迹象。
报警功能： 该模块可以配置为在检测到故障迹象时触发报警。
应用
3500/42M 176449-02 四通道监测仪广泛应用于各种工业应用，包括：
石油和天然气
电力
化工
造纸
其他需要 Bently Nevada 监测系统的行业
工作原理
3500/42M 176449-02 四通道监测仪接收来自邻近和地震传感器的模拟信号，并将其转换为数字信号。然后，该模块分析这些数字信号以提取有关振动水平、位置和机器状况的信息。如果检测到潜在的故障迹象，该模块将触发报警。
技术规格
输入信号：模拟电压或电流信号
输入范围：±5 V、±10 V、4-20 mA
测量精度：±0.5%
工作频率：2 Hz 至 20 kHz
通信接口：以太网、RS232
工作温度：-40°C 至 +85°C
存储温度：-55°C 至 +90°C
防护等级：IP67
安装
3500/42M 176449-02 四通道监测仪的安装非常简单。只需将其插入 Bently Nevada 3500 机架的相应插槽中即可。

3500/42M 176449-02 4通道监测仪 输入来自邻近和地震传感器

Product overview
The 3500/42M 176449-02 is a four-channel monitor manufactured by Bently Nevada for use in the Bently Nevada 3500 monitoring system. It can accept input from proximity and seismic sensors and provides vibration and position measurements as well as conditional signal analysis.
Product characteristics
Four-channel input: 3500/42M 176449-02 can accept input from four adjacent or seismic sensors.
Vibration and position measurement: This module measures vibration levels and positions and provides important information about the condition of the machine.
Conditional signal analysis: This module can analyze signals from sensors and identify potential signs of failure.
Alarm function: This module can be configured to trigger an alarm when signs of failure are detected.
Apply
3500/42M 176449-02 Four-channel monitors are used in a wide range of industrial applications, including:
Oil and gas
electricity
Chemical engineering
papermaking
Other industries requiring a Bently Nevada monitoring system
Working principle
The 3500/42M 176449-02 four-channel monitor receives analog signals from proximity and seismic sensors and converts them into digital signals. The module then analyzes these digital signals to extract information about the vibration level, location and condition of the machine. If signs of potential failure are detected, the module triggers an alarm.
Technical specification
Input signal: Analog voltage or current signal
Input range: ±5 V, ±10 V, 4-20 mA
Measurement accuracy: ±0.5%
Operating frequency: 2 Hz to 20 kHz
Communication interface: Ethernet, RS232
Operating temperature: -40°C to +85°C
Storage temperature: -55°C to +90°C
Protection level: IP67
Install
The installation of the 3500/42M 176449-02 four-channel monitor is very simple. Simply plug it into the corresponding slot in the Bently Nevada 3500 rack.

3500/42M 176449-02 4通道监测仪 输入来自邻近和地震传感器