3500/15 127610-01 交流电源模块 安装在机架左侧的指定槽位上

3500/15 127610-01 交流电源模块 安装在机架左侧的指定槽位上

概述
3500/15 127610-01 是一款交流电源模块，用于为 Bently Nevada 3500 系列机架系统供电。它是一款半高模块，必须安装在机架左侧的指定插槽中。
安装步骤
确保机架已关闭并断电。
从机架左侧卸下挡板。
将电源模块插入机架左侧的指定插槽中。
拧紧电源模块的固定螺钉。
更换挡板。
接通机架电源。
注意事项
在安装电源模块之前，请仔细阅读产品手册。
确保电源模块与您的机架兼容。
请勿在潮湿或多尘的环境中安装电源模块。
请勿在电源模块附近存放易燃物品。

3500/15 127610-01 交流电源模块 安装在机架左侧的指定槽位上

summarize
The 3500/15 127610-01 is an AC power module designed to power the Bently Nevada 3500 Series rack system. It is a half-height module that must be installed in a designated slot on the left side of the rack.
Installation procedure
Make sure the rack is closed and powered off.
Remove the baffle from the left side of the frame.
Insert the power module into the specified slot on the left of the rack.
Tighten the screws to secure the power module.
Replace the baffle.
Power on the rack.
Matters needing attention
Before installing the power module, read the product manual carefully.
Make sure the power module is compatible with your rack.
Do not install a power module in a humid or dusty environment.
Do not store flammable materials near the power module.

3500/15 127610-01 交流电源模块 安装在机架左侧的指定槽位上