8840-1934 并联发电机组控制器

8840-1934 并联发电机组控制器

8840-1934并联发电机组控制器是一款功能齐全、性能卓越的控制器，用于控制并联运行的发电机组。它具有以下特点：
可靠: 该控制器采用可靠的设计，可确保并联发电机组的稳定运行。
易于使用: 该控制器易于安装、配置和操作。
功能齐全: 该控制器提供以下功能： 并联控制：自动控制发电机组的并联和解列
负荷分配：自动分配各发电机组的负荷
频率和电压调节：自动调节并联发电机组的频率和电压
故障保护：提供多种故障保护功能，以确保并联发电机组的安全运行
可扩展: 该控制器可扩展，以满足不同应用需求。
应用:
8840-1934并联发电机组控制器可用于各种应用，包括：
电厂
医院
数据中心
商业楼宇
工业设施
技术规格:
额定电压: 400 V AC
额定电流: 600 A
频率范围: 47.5 Hz 至 52.5 Hz
电压精度: ±1%
频率精度: ±0.25 Hz
工作温度: -10°C 至 55°C
防护等级: IP65
功能:
并联控制:自动检测并联条件
自动控制发电机组的并联和解列
提供多种并联模式，包括手动并联、自动并联和黑启动
负荷分配:自动分配各发电机组的负荷
提供多种负荷分配策略，包括等功率分配、等百分比分配和经济分配
频率和电压调节:自动调节并联发电机组的频率和电压
满足各种电网要求
故障保护:提供多种故障保护功能，包括过电压保护、欠电压保护、过电流保护、欠电流保护、频率过高保护、频率过低保护、失速保护、孤岛运行保护等
其他功能:提供多种监控和测量功能，包括发电机组的电压、电流、频率、功率、功率因素等
提供事件记录和告警功能
可通过 RS-232 或 RS-485 通信接口与上位系统连接

8840-1934 并联发电机组控制器

The 8840-1934 Parallel Generator Set controller is a full-featured, high-performance controller for controlling parallel operation of generator sets. It has the following characteristics:
Reliable: The controller has a reliable design to ensure the stable operation of the parallel generator set.
Easy to use: The controller is easy to install, configure and operate.
Full function: The controller provides the following functions: Parallel control: automatically control the parallel and uncoupling columns of the generator set
Load distribution: Automatically distribute the load of each generator set
Frequency and voltage regulation: automatically adjust the frequency and voltage of the parallel generator set
Fault protection: provides a variety of fault protection functions to ensure the safe operation of the parallel generator set
Scalable: The controller is scalable to meet different application requirements.
Applications:
8840-1934 Parallel generator set controllers can be used in a variety of applications, including:
Power plant
nosocomium
Data center
Commercial premises
Industrial facility
Technical specifications:
Rated voltage: 400 V AC
Rated current: 600 A
Frequency range: 47.5Hz to 52.5Hz
Voltage accuracy: ±1%
Frequency accuracy: ± 0.25Hz
Operating temperature: -10°C to 55°C
Protection class: IP65
Features:
Parallel control: Automatically detects parallel conditions
Automatic control of parallel and uncoupling of generator sets
Multiple parallel modes are available, including manual parallel, automatic parallel and black start
Load distribution: Automatically distribute the load of each generator set
It provides a variety of load distribution strategies, including equal power distribution, equal percentage distribution and economic distribution
Frequency and voltage regulation: automatically adjust the frequency and voltage of the parallel generator set
Meet various grid requirements
Fault protection: Provides a variety of fault protection functions, including over voltage protection, under voltage protection, over current protection, under current protection, too high frequency protection, too low frequency protection, stall protection, island operation protection
Other features: Provides a variety of monitoring and measurement functions, including voltage, current, frequency, power, power factors, etc., of the generator set
Provides event recording and alarm functions
It can be connected to the upper system through the RS-232 or RS-485 communication interface

8840-1934 并联发电机组控制器