CE03250 伺服驱动器模块

CE03250 伺服驱动器模块

特点:
增量式编码器
扭矩更新zui高可达16 kHz
5V至24V工作电压
两个双向RS 422 I/o
两个模拟输入
Kollmorgen/Danaher Motion SERVOSTAR CD SynqNet驱动器是一种syn qnet伺服驱动器，基于servo star CD驱动器的成熟系列。功率级与CD相同，而控制级是专用的SynqNet设计。CD SynqNet设计为扭矩驱动器，由SynqNet控制器以高伺服更新速率提供扭矩命令。提供广泛的I/O支持，既有特定功能输入，如限位开关、原位和制动，也有许多通用I/O。CD SynqNet提供N分频功能，使其能够通过编程在驱动器编码器计数寄存器每N次计数时产生一个输出脉冲。

SynqNet是一种高性能、全数字同步网络，专为多轴运动控制应用而设计。SynqNet的物理层基于以太网物理层100BASE-TX的IEEE 802.3标准，而SynqNet的数据链路层和应用层是专门为运动控制应用而设计的。100BASE-TX媒体系统基于ANSI TP-PMD物理媒体标准中发布的规范。100BASE- TX系统通过两对电线工作，一对用于“接收”数据信号，另一对用于“发送”数据信号。

CE03250 伺服驱动器模块

Features:
Incremental encoder
Torque updates up to 16 kHz
Operating voltage from 5V to 24V
Two two-way RS 422 I/o
Two analog inputs
Kollmorgen/Danaher Motion SERVOSTAR CD SynqNet drive is a syn qnet servo drive based on the mature family of servo star CD drives. The power level is the same as the CD, while the control level is a dedicated SynqNet design. CD SynqNet is designed as a torque driver with torque commands provided by the SynqNet controller at a high servo update rate. A wide range of I/O support is available, both for specific function inputs such as limit switches, in situ and braking, and for many general purpose I/ OS. CD SynqNet provides an n-division function that enables it to be programmed to produce an output pulse every N counts in the driver encoder count register.

SynqNet is a high-performance, fully digital synchronous network designed for multi-axis motion control applications. SynqNet's physical layer is based on the IEEE 802.3 standard for Ethernet physical layer 100BASE-TX, while SynqNet's data link layer and application layer are specifically designed for motion control applications. The 100BASE-TX media system is based on the specifications published in the ANSI TP-PMD physical Media Standard. The 100BASE-TX system works through two pairs of wires, one for "receiving" the data signal and the other for "sending" the data signal.