2711P-T10C22D9P 是一款触摸屏性能的PanelView

2711P-T10C22D9P 是一款触摸屏性能的PanelView

这款PanelView Plus 7 2711P-T10C22D9P由制造商Allen Bradley生产，是一款触摸屏性能的PanelView，用于通过18位，800 x 600 SVGA分辨率的彩色TFT显示器向网络输入命令。该面板上的白光二极管，固态LED背光具有约50,000小时的使用寿命，并且无法更换。它包含一个SD卡，允许外部存储，支持SD卡对应的数字1784-SDx。它还有两个10/100 Base-T DLR以太网端口。此外，它还有一对a型高速2.0 USB接口和一个高速2.0设备接口。

具有24伏直流标称电源电压，本单元zui大功耗为50瓦，支持(PELV)和(SELV) 24伏直流电源。这款手机重约5.03磅(或2.28公斤)，尺寸约为9.92 x 11.69 x 2.74英寸(或252 x 297 x 69.6毫米)，显示屏为10.4英寸。与2711P-T10C22D9P一起可以购买许多配件，包括各种保护覆盖层，电源端子块，SD(安全数字)卡和电池更换，它有几个认证，包括但不限于ATEX 2区，22,CE (LVD)和标准仅EAC。

该操作终端具有先进的以太网功能。它有2个以太网接口，用于集成工厂车间的控制器，并将系统连接到企业级。这些以太网端口支持线性、环形和星型拓扑结构。以太网可以在不超过100米的距离内使用，但是，它可以很容易地使用以太网交换机或光纤转换器进行扩展。支持10/ 100mbps的传输速度，具有自动协商能力。

PanelView Plus 7 Performance终端具有512 MB RAM和512 MB存储以及80 MB非易失性存储，用于应用程序。

2711P-T10C22D9P 是一款触摸屏性能的PanelView

This PanelView Plus 7 2711P-T10C22D9P by manufacturer Allen Bradley is a touchscreen performance PanelView, used to input commands to a network through its color TFT display with an 18-bit, 800 x 600 SVGA resolution.  The white-light diode, solid state LED backlight on this panelview has around 50,000 hours of life and CANNOT be replaced.  It contains a single SD card to allow for external storage which supports SD cards corresponding to the number 1784-SDx.  It also has two 10/100 Base-T DLR Ethernet ports.  In addition, it has a pair of Type A, high speed 2.0 USB ports and one high speed 2.0 device port.

With 24 Volts of DC nominal supply voltage, this unit consumes at maximum 50 Watts of power and supports (PELV) and (SELV) 24 Volt DC supplies.  This unit weighs roughly 5.03 pounds (or 2.28 kilograms), measuring approximately 9.92 x 11.69 x 2.74 inches (or 252 x 297 x 69.6 millimeters), with a 10.4-inch display screen.  A number of accessories can be purchased along with the 2711P-T10C22D9P, including a variety of protective overlays, power terminal blocks, SD (Secure Digital) cards, and battery replacements, and it has several certifications including but not limited to ATEX Zone 2, 22, CE (LVD), and the standard only EAC.

This operator terminal comes with an advanced Ethernet capability.  It has Two (2) Ethernet interface that is used to integrate controllers in the factory floor and connect the system to the enterprise level.  These Ethernet port support linear, ring and star topologies.  Ethernet may be used in distances not exceeding 100 meters however, it can be easily extended using Ethernet switches or Fiber Optic converter.  It supports 10/100 Mbps transmission speed with auto-negotiation capability.

The PanelView Plus 7 Performance terminal has 512 MB RAM and 512 MB storage and 80 MB nonvolatile storage for applications.