PXI-6052E 16位分辨率多功能DAQ

PXI-6052E 16位分辨率多功能DAQ

美国国家仪器公司PXI-6052E(部件编号:777962-01,186408E-01)是一个16通道，16位分辨率多功能DAQ，这是全功能的E系列的成员。这种单槽PXI模块具有两个模拟输出，模拟/数字触发，8个数字I/O线，15个模拟输入信号范围和两个24位计数器/定时器。NI PXI-6052E提供LabVIEW实时性能，并完全兼容其他软件包/应用程序开发环境(ADEs)，如VI Logger, Measurement Studio, Visual Basic, c#和C/ c++。这个多功能数据采集可以配置和编程与NI-DAQ 7驱动软件。要使用NI PXI-6052E，用户需要NI-DAQ、一台计算机、DAQ设备以及LabVIEW或Measurement Studio(可选)。

美国国家仪器公司PXI-6052E提供16个单端或8个差分通道(每个通道可软件选择)和每秒333 k的zui大采样率。在选择20 V范围工作时，该型号提供±10 V双极输入范围。然而，在100 mV(zui低软件可选范围)时，PXI-6052E提供±50 mV双极输入范围和0至100 mV单极输入范围。就其传递特性而言，该型号提供±1.5(典型)和±3(zui大)LSB。这个DAQ也配备了一个频率标度器。直流耦合装置有6条触发线，1颗星触发，并配有3个DMA通道。

其计数器/定时器和频率标量的分辨率分别为24位和4位;它们是5个VTTL/CMOS兼容。这个多功能DAQ的推荐热身时间是15分钟。校正周期为一年。NI PXI-6052E配备了一个雄SCSI-II型，68针雄SCSI-II I/O连接器。该模型还支持外部输入模拟或数字触发器(PFI 0/AI START TRIG)在10 kΩ，具有直流耦合。该设备重7.2盎司，尺寸为6.3 x 3.9英寸。推荐使用温度为0 ~ 55℃，储存温度为-20 ~ 70℃。

PXI-6052E 16位分辨率多功能DAQ

The National Instruments PXI-6052E (Part Number: 777962-01, 186408E-01) is a 16-Channel, 16-Bit Resolution Multifunction DAQ, which is a member of the full-featured E Series.  This single-slot PXI module features two Analog Outputs, Analog/Digital Triggering, eight digital I/O lines, 15 analog input signal ranges, and two 24-bit counters/timers.  The NI PXI-6052E offers real-time performance with LabVIEW, and is fully compatible with other software packages/application development environments (ADEs) such as VI Logger, Measurement Studio, and Visual Basic, C#, and C/C++.  This Multifunction DAQ can be configured and programmed with the NI-DAQ 7 driver software.  To utilize the NI PXI-6052E, the user needs NI-DAQ, a computer, the DAQ device, and either LabVIEW or Measurement Studio (optional).

The National Instruments PXI-6052E offers 16 single-ended or 8 differential channels (software selectable per channel) and 333 kS per second maximum sampling rate.  While operating with 20 V range selected, this model offers ±10 V bipolar input range.  However, at 100 mV (the lowest software selectable range) the PXI-6052E provides ±50 mV bipolar input range and 0 to 100 mV unipolar input range.  As far as its transferring characteristics are concerned, this model offers ±1.5 (typical) and ±3 (maximum) LSB.  This DAQ also comes equipped with one Frequency Scaler.  The DC coupled device has 6 trigger lines with 1 star trigger, and is equipped with 3 DMA channels.

The resolution of its counter/timers and frequency scalar is 24 bits and 4 bits respectively;  they are 5 VTTL/CMOS compatible.  The recommended warm-up time for this Multifunction DAQ is 15 minutes.  The calibration interval is one year.  The NI PXI-6052E comes equipped with a male SCSI-II type, 68-pin male SCSI-II I/O connector.  This model also supports external input for analog or digital trigger (PFI 0/AI START TRIG) at 10 kΩ, with DC coupling.  The device weighs 7.2 oz., and has the dimensions: 6.3 x 3.9 in.  It has a recommended operating temperature of 0 to 55 °C, and a storage temperature of –20 to 70 °C.

PXI-6052E 16位分辨率多功能DAQ