WOODWARD 9907-1106数字量输出模块 易于与第三方辅助设备集成

WOODWARD 9907-1106数字量输出模块 易于与第三方辅助设备集成

WOODWARD   9907-1106 易于与第三方辅助设备集成作为单一系统中的完整解决方案，HazardWatch FX-12系统包括:独立的本地火灾和气体报警面板，带触摸屏操作界面；根据NFPA 72，冗余电源支持火气系统；易于与第三方辅助设备集成，如喇叭、信号灯和灭火系统；以及FM认证的以太网/IP系统与DCS或ESD系统的通信，带可选Modbus。HazardWatch FX-12每个报警面板zui多可容纳12个现场设备，zui多可连接12个面板。面板安装在NEMA 12级外壳的墙壁上。用户连接在安装在轨道上的“摆动连杆”上，带有按输入/输出类型组织的端子板。PLC处理器和触摸屏配有非易失性存储器。HazardWatch FX-12具有高度的通用性，可支持全方位的火灾、火焰和气体探测需求，与MSA的业界领 先的火焰和气体传感技术兼容。

可用的火焰探测器型号包括通用监视器多光谱红外(MSIR) FL4000H、紫外/红外光学FL500等。对于可燃或有毒气体和缺氧(O2)监控，HazardWatch FX-12支持Ultima X5000和普通监视器S5000气体探测器。此外，对于储罐或管道泄漏监测，可提供Observeri超声波气体泄漏(UGLD)检测器，对于工厂或区域周边监测，支持IR5500或Senscient ELDS开路气体检测器。对于现场或云中的安全监控，HazardWatch FX-12的可选FieldServer网关支持通过BACnet、EtherNet/IP、Modbus、SNMP和许多其他协议全天候共享关键操作数据。MSA的远程监控和通知解决方案通过通知SCADA系统现场发生的事件，帮助支持火灾报警面板和HazardWatch FX-12火气系统。

WOODWARD 9907-1106数字量输出模块 易于与第三方辅助设备集成

Easy to integrate with third party auxiliaries As a complete solution in a single system, the HazardWatch FX-12 system includes: separate local fire and gas alarm panel with touch screen operation interface; According to NFPA 72, redundant power supplies support fire gas systems; Easy integration with third party auxiliary equipment, such as horns, lights and fire extinguishing systems; And communication between an FM-certified Ethernet /IP system and a DCS or ESD system with optional Modbus. HazardWatch FX-12 can accommodate up to 12 field devices per alarm panel and can connect up to 12 panels. The panels are mounted on the walls of the NEMA Level 12 housing. The user connects on a "swing link" mounted on the track with terminal plates organized by input/output type. PLC processor and touch screen with non-volatile memory. The HazardWatch FX-12 is highly versatile to support the full range of fire, flame and gas detection needs, compatible with MSA's industry-leading flame and gas sensing technology.

Available flame detector models include the Universal Monitor MultiSpectral Infrared (MSIR) FL4000H, ultraviolet/Infrared Optical FL500, and others. For combustible or toxic gases and hypoxia (O2) monitoring, the HazardWatch FX-12 supports Ultima X5000 and Common Monitor S5000 gas detectors. In addition, Observeri Ultrasonic Gas leak (UGLD) detectors are available for tank or pipeline leak monitoring, and IR5500 or Senscient ELDS open circuit gas detectors are supported for plant or area perimeter monitoring. For safety monitoring in the field or in the cloud, HazardWatch FX-12's optional FieldServer gateway supports 24/7 sharing of critical operational data via BACnet, EtherNet/IP, Modbus, SNMP and many other protocols. MSA's remote monitoring and notification solution helps support the fire alarm panel and HazardWatch FX-12 fire gas system by notifying SCADA systems of incidents occurring on site.

WOODWARD 9907-1106数字量输出模块 易于与第三方辅助设备集成