ICS Triplex T8800 数字输入24VDC 40通道模块 TMR系统

ICS Triplex T8800 数字输入24VDC 40通道模块 TMR系统

产品描述：

 T8800C它旨在与电源、控制计算机、现场连接和外部网络连接一起用作完整AADvance系统的一部分。ICS T8800C控制器是一种数字输出单工型控制器模块。ICS T8403C它带有8个输出通道，其额定电压为24伏直流电。ICS Triplex T8403C该控制器支持1.174 毫秒和2.202 毫秒的双扫描时间。ICS T8800C数字输出控制器模块已获准在非危险工业环境中使用。ICS T8403C它可以与 AADvance T9892 终端组件模块一起使用，为其提供8个支持双配置的附加输出通道。

ICS T8800C罗克韦尔AB 数字输入模块可以为每个输入组设置此字段。输入值配置过加速阈值上限(RPM/s)。这定义了可以通过应用程序接口设置的zui大过加速阈值级别。当加速度大于或等于配置的阈值时，过加速输出将跳闸。可用于此字段的值范围为0到10000。默认值为零。如果限制设置为零，则组的过加速跳闸阈值将被禁用(即始终跳闸)。仅当组速度为零时，配置的限制才能增加。ICS T8800C可以为组内的每个输出设置此复选框。如果输出已配置为闭锁(见3.1.13)，将此复选框设置为ticketstate将配置自动跳闸复位的输出。对于配置为非闭锁的输出，此配置项无效。清除复选框(默认)将禁用该输出的自动重置功能。ICS T8800C在自动复位模式下，当组处于零速度时，闭锁输出的输出跳闸条件将自动复位。默认操作模式是禁用自动复位。

ICS Triplex T8800 数字输入24VDC 40通道模块 TMR系统

Product Description:

T8800C It is designed to be used as part of a complete AADvance system with power supply, control computer, field connections and external network connections. The ICS T8800C controller is a digital output simplex controller module. ICS T8403C It comes with 8 output channels and its rated voltage is 24 volts DC. ICS Triplex T8403C The controller supports dual scan times of 1.174 ms and 2.202 ms. The ICS T8800C digital Output controller module is approved for use in non-hazardous industrial environments. ICS T8403C It can be used with the AADvance T9892 Terminal component module, providing it with eight additional output channels that support dual configurations.

The ICS T8800C Rockwell AB Digital input module can set this field for each input group. Input Value Upper limit of the overacceleration threshold (RPM/s). This defines the maximum overspeed threshold level that can be set through the application interface. When the acceleration is greater than or equal to the configured threshold, the overacceleration output will trip. The values available for this field range from 0 to 10000. The default value is zero. If the limit is set to zero, the group's overaccelerate trip threshold is disabled (that is, always trip). The configured limit increases only if the group speed is zero. ICS T8800C can set this check box for each output within a group. If the output is configured to be blocked (see 3.1.13), setting this check box to ticketstate will configure the output for automatic trip reset. This configuration item is not valid for output configured as non-blocking. Clearing the check box (default) disables the automatic reset feature for this output. ICS T8800C In Auto reset mode, the output trip condition of the blocked output is automatically reset when the group is at zero speed. The default operation mode is disable automatic reset.

ICS Triplex T8800 数字输入24VDC 40通道模块 TMR系统