PCI-6230 多功能I/O设备

PCI-6230 多功能I/O设备

这国家仪器PCI-6230(零件号:779615-01，192236A-01)是一个孤立的、多功能的银行数据采集板从m系列。该器件将隔离的性能和安全优势与精 确精密控制和测量所需的高性能放大、时序和校准技术完美结合。中包含的银行隔离功能镍PCI-6230带来噪声抑制、瞬态安全、减少接地环路以及共模电压抑制。

该器件是高电压和高电噪声环境应用的理想解决方案。这镍PCI 6230 DAQ可用于接近传感器、控制阀、泵、流量计、继电器等。该DAQ板通过16位分辨率ADC提供8路单端或4路差分模拟输入，输入范围为10 V、5 V和1 V，DC耦合，zui大采样速率为250 KS/s，时序精度为50 ppm。这NI PCI 6230具有高达60 VDC的连续存储体隔离和高达1950 VDC的通道至总线隔离。

该型号设计有四个模拟输出通道，由16位数模转换器支持。每个模拟输出通道可实现的zui大更新速率为500 kS/s，用户可以在两个、三个或四个通道上分别实现450、425和400 KS/s的更新速率。这镍PCI-6230支持DC输出耦合，输出范围为±10v，该器件内置的输出FIFO可处理8，191个输出，并由多个通道共享。对于边沿、半周期、周期和其他计数器测量PCI-6230具有两个32位计数器/定时器，工作频率也为80 MHz。该设备配有一个37针D-SUB I/O连接器。

这PCI-6230使用NIDAQmx驱动软件运行，该驱动软件可通过软件包或应用开发环境(ade)编程，如LabVIEW或LabWindows/CVI。NI设备重0.24磅，尺寸为3.8 x 6.1英寸。在物理维度上。它的推荐工作温度范围为0至55°c。

PCI-6230 多功能I/O设备
This national Instrument PCI-6230(Part number :779615-01, 192236A-01) is an isolated, versatile bank data acquisition board from the m series. The device combines the performance and safety benefits of isolation with the high-performance amplification, timing and calibration technologies required for precise precision control and measurement. The included bank isolation nickel PCI-6230 provides noise suppression, transient safety, reduced ground loops, and common mode voltage suppression.

The device is an ideal solution for applications in high voltage and high electrical noise environments. This nickel PCI 6230 DAQ can be used for proximity sensors, control valves, pumps, flow meters, relays and more. The DAQ board provides 8 single-ended or 4-way differential analog inputs over 10 V, 5 V, and 1 V via a 16-bit resolution ADC, with DC coupling, a maximum sampling rate of 250 KS/s, and a timing accuracy of 50 ppm. This NI PCI 6230 features up to 60 VDC continuous storage isolation and up to 1950 VDC channel to bus isolation.

The model is designed with four analog output channels supported by a 16-bit digital-to-analog converter. The maximum update rate per analog output channel is 500 kS/s, and users can achieve 450, 425, and 400 KS/s on two, three, or four channels, respectively. The nickel PCI-6230 supports DC output coupling with an output range of ±10v, and the device's built-in output FIFO can handle 8,191 outputs and is shared by multiple channels. For edge, half-period, period, and other counter measurements, the PCI-6230 has two 32-bit counters/timers that also operate at 80 MHz. The unit comes with a 37-pin D-SUB I/O connector.

This PCI-6230 runs using the NIDAQmx driver software, which can be programmed through a package or application development environment (ade) such as LabVIEW or LabWindows/CVI. The NI device weighs 0.24 pounds and measures 3.8 x 6.1 inches. In the physical dimension. Its recommended operating temperature range is 0 to 55°c.

PCI-6230 多功能I/O设备