MPL-B320P-MJ74AA 伺服电机是一款 1.5 千瓦交流电机

MPL-B320P-MJ74AA 伺服电机是一款 1.5 千瓦交流电机

Allen-Bradley MPL-B320P-MJ74AA 伺服电机是一款 1.5 千瓦交流电机，额定转速为 5000 rpm，磁铁堆叠长度为 50.8 毫米，框架尺寸为 100 毫米。MPL-B320P-MJ74AA 伺服电机属于 Allen-Bradley 的 MP 系列伺服电机，其中包括额定转速高达 8000 rpm、输出功率为 0.16 至 18.6 千瓦的电机。MP 系列低惯量电机的连续失速转矩范围为 0.26 至 163 N-m，峰值失速转矩范围为 0.74 至 278 N-m。 MP 系列电机可与 Allen-Bradley Kinetix 6000、Kinetix 300/350 和 Kinetix 7000 变频器配合使用。


MPL-B320P-MJ74AA 伺服电机的额定峰值转速为 5000 rpm。其输出额定值为 1.5 千瓦，输入额定值为 400 伏交流电。安装时，可以使用IEC公制电机法兰上的FF型无安装孔。反馈通过板载 1024 正弦/余弦绝 对值多圈编码器（采用 hiperface 协议）提供。对于制动，MPL-B320P-MJ74AA 伺服电机上提供了一个集成的 24 伏直流制动器。

MPL-B320P-MJ74AA 伺服电机包括标准控制选项。伺服电机可以通过电缆连接到任何 Allen-Bradley Kinetix 系列驱动器。该电缆通过电机上的圆形DIN连接器与电机连接，该连接器可180度旋转。电机上有轴键，但没有轴封。电机轴的默认防护等级为 IP 50。安装可选的轴封可将电机轴防护等级提高到 IP 66 级别。切勿将电机轴用于搬运或提升电机。

MPL-B320P-MJ74AA 伺服电机是一款 1.5 千瓦交流电机

The Allen-Bradley MPL-B320P-MJ74AA servo motor is a 1.5 kW AC motor rated at 5000 rpm, with a magnet stack length of 50.8 mm and a frame size of 100 mm. The MPL-B320P-MJ74AA servo motor is part of Allen-Bradley's MP family of servo motors, which includes motors rated up to 8,000 rpm and with output power of 0.16 to 18.6 kW. The MP series low inertia motors have a continuous stall torque range of 0.26 to 163 N-m and a peak stall torque range of 0.74 to 278 N-m. The MP series motors can be used with Allen-Bradley Kinetix 6000, Kinetix 300/350 and Kinetix 7000 inverters.


The MPL-B320P-MJ74AA servo motor has a rated peak speed of 5000 rpm. It has an output rating of 1.5 kilowatts and an input rating of 400 volts AC. When mounting, you can use the FF type on the flange of the IEC metric motor without mounting holes. Feedback is provided via an onboard 1024 sine/cosine absolute multiturn encoder using the hiperface protocol. For braking, an integrated 24-volt DC brake is provided on the MPL-B320P-MJ74AA servo motor.

The MPL-B320P-MJ74AA servo motor includes standard control options. The servo motor can be connected to any Allen-Bradley Kinetix series drive by cable. The cable is connected to the motor via a circular DIN connector on the motor, which can be rotated 180 degrees. There are shaft keys on the motor, but no shaft seals. The default protection class of the motor shaft is IP 50. Installation of an optional shaft seal increases the motor shaft protection level to IP 66. Do not use motor shafts to carry or lift motors.

MPL-B320P-MJ74AA 伺服电机是一款 1.5 千瓦交流电机