IPMC761 多功能I/O模块 连接到主机板PCI总线上

IPMC761 多功能I/O模块 连接到主机板PCI总线上

艾默生/摩托罗拉IPMC712 / IPMC761多功能I/O模块是可选模块，可向后兼容早期使用MVME761或MVME712M过渡板的摩托罗拉计算机集团(MCG)产品。早期的MCG产品包括MVME2600和MVME2700系列sbc。

IPMC712和IPMC761可以安装在MVME5100 SBC上使用。这两种型号都是围绕PMC外形设计的，两个模块都包含PCI/ISA桥接、超宽SCSI适配器和Super I/O功能。两个模块都是单宽，标准长度，标准高度的PMC板。通过PMC P11、P12、P13、P14和P15连接器连接到主机板PCI总线上。两个模块通过PMC连接器绘制+5V和+3.3V。

IPMC712/761 I/O模块安装和使用手册提供了安装，使用和编程IPMC712或IPMC761模块所需的信息。IPMC712和IPMC761是安装在MVME5100、MVME5500和MVME6100单板计算机(sbc)上的可选I/O模块。他们的设计采用了PowerPlus II架构。
IPMC712是IPMC761的变种。两个模块的主要区别在于以太网端口和串口3和串口4的物理接口。这些差异以及其他差异将在本手册的以下章节中讨论。

IPMC761 多功能I/O模块 连接到主机板PCI总线上
The Emerson/MOTOROLA IPMC712 / IPMC761 multifunction I/O module is an optional module that is backward compatible with earlier MOTOROLA Computer Group (MCG) products that used the MVME761 or MVME712M transition boards. Early MCG products included the MVME2600 and MVME2700 series of sbc.

IPMC712 and IPMC761 can be installed on the MVME5100 SBC. Both models are designed around the PMC form factor, and both modules include PCI/ISA bridging, an ultra-wide SCSI adapter, and Super I/O capabilities. Both modules are single width, standard length, and standard height PMC boards. Connect to the motherboard PCI bus via PMC P11, P12, P13, P14, and P15 connectors. The two modules draw +5V and +3.3V via PMC connectors.

The IPMC712/761 I/O Module Installation and Use Manual provides the information needed to install, use, and program an IPMC712 or IPMC761 module. IPMC712 and IPMC761 are optional I/O modules installed on the MVME5100, MVME5500, and MVME6100 single-board computers (sbc). Their design uses the PowerPlus II architecture.
IPMC712 is a variant of IPMC761. The main difference between the two modules is the Ethernet port and the physical interface of serial ports 3 and 4. These and other differences are discussed in the following sections of this manual.

IPMC761 多功能I/O模块 连接到主机板PCI总线上