BENTLY 3500/25 增强型键相 双通道模块

BENTLY 3500/25 增强型键相 双通道模块

产品描述：
3500/25增强型键相模块为半高，双通道模块，用于向3500机架中的监测器模块。

模块接收来自接近探头或磁性拾取器的输入信号，以及将信号转换为数字键相器信号当轴上的键相器标记与键相传感器。

3500机械保护系统zui多可接受四个键相器信号，以实现正常配置和zui多八个键相器信号配置键相器信号是来自旋转轴或齿轮的每转一次或每转多次脉冲用于提供精 确的定时测量。这允许3500监测器模块和外部诊断测量轴转速和向量参数，如1X振幅和阶段增强型键相模块是一种改进型3500系统模块。

它提供扩展的键相器信号与之前的设计相比在以下方面保持完全向下兼容性与现有键相器模块一起形成、配合和运行在传统系统中。

键器模块PWA125792-01被更新的149369-01模块完全替换。当三模块需要系统键相器输入时冗余（TMR）应用，3500系统应采用两个键相器模块。

BENTLY 3500/25 增强型键相 双通道模块

Product Description:
The 3500/25 enhanced key phase module is a half-height, dual-channel module for the monitor module in the 3500 rack.

The module receives input signals from close probes or magnetic pickups, as well as converts the signal to a digital key phaser signal when the key phaser on the axis is marked with the key phase sensor.

The 3500 mechanical protection system can accept up to four key phase signals for normal configuration and up to eight key phase signals Configuration Key phase signals are one or multiple pulses per revolution from a rotating shaft or gear to provide accurate timing measurements. This allows the 3500 monitor module and external diagnostics to measure shaft speed and vector parameters such as 1X amplitude and phase Enhanced Bond Phase Module is an improved 3500 system module.

It provides an extended keyser signal compared to previous designs in the following areas to maintain full backward compatibility with existing keyser modules to form, fit and run in legacy systems.

The keyer module PWA125792-01 was completely replaced by the updated module 149369-01. When three modules require system keying input for redundancy (TMR) applications, the 3500 system should use two keying modules.

BENTLY 3500/25 增强型键相 双通道模块