VE3008 EMERSON 控制模块 PLC/DCS备件

VE3008 EMERSON 控制模块 PLC/DCS备件

技术参数：

输入：涡轮传感器PR6422/...～PR6426/...

输出：直流电压上叠加与轴振动成正比的交流电压信号。有开路和短路保护；有反向保护。

输出电压线性范围：-4...-20V(供电电压为-24V）

输出电压的zui大范围：-1...-22V；

输出电压：-12V（两端对称的测量范围）；

内阻：100k

响应时间：15

精度（所有数据均相对于满量程）

线性误差：

前置器CON0X1  CON0X1/91

连接传感器PR6422：≤1.5%

连接传感器PR6423：≤1.0%  ≤2%

连接传感器PR6424：≤1.5%  ≤2%

连接传感器PR6425：≤6.0%

连接传感器PR6426：≤1.5%  ≤2%

温漂：零点200mV/100K；灵敏度＜2%/100K。 

VE3008 EMERSON 控制模块 PLC/DCS备件

Technical parameters:

Input: Turbine Sensor PR6422/... ~ PR6426/...

Output: The AC voltage signal superimposed on the DC voltage is proportional to the shaft vibration. Open circuit and short circuit protection; There is reverse protection.

Output voltage linear range: -4... -20V(Supply voltage is -24V)

Maximum range of output voltage: -1... -22V;

Output voltage: -12V (symmetrical measurement range at both ends);

Internal resistance: 100k

Response time: 15

Accuracy (all data relative to full scale)

Linear error:

Prefix CON0X1 Con0x1/91

Connect sensor PR6422: ≤1.5%

Connect sensor PR6423: ≤1.0% ≤2%

Connect sensor PR6424: ≤1.5% ≤2%

Connect sensor PR6425: ≤6.0%

Connect sensor PR6426: ≤1.5% ≤2%

Temperature drift: zero 200mV/100K; Sensitivity < 2%/100K.

VE3008 EMERSON 控制模块 PLC/DCS备件