UFC911B108 ABB 是一个AO处理可编程控制模块

UFC911B108 ABB 是一个AO处理可编程控制模块

该TU845MTU可以有多达I/O 8通道和2+2处理电压连接。每个通道有两个L/0连接和一个ZP连接。输入信号通过单独的分流棒TY801连接。分流棒用于选择电压和电流输入。zui大额定电压为50V，zui大额定电流为2A。

MTU分配两个Module Bus，一个给每个I/0模块，另一个MTU。它还通过将输出位置信号转移到下一个MTU来生成正确的I/O模块地址。它有一个机械锁问，将MTU锁定在DIN导轨上

四个机械键，每个I/0模块两个，用于为不同类型的I/0模块配置MTU。这只是一种机械配置，不会影响MTU或1/0模块的功能。每把钥匙有六个位置，总共有36种不同的配置.

特点和优势

使用双线连接和现场电源分配完成I/O模块的安装。

多达8个通道的现场信号和过程电源连接

连接到两个Module By和/o模块

机械键控可防止插入错误的I/O模块

接地用DIN导轨的闭锁装置。

DIN导轨安装 

UFC911B108 ABB 是一个AO处理可编程控制模块

The TU845MTU can have up to 8 I/O channels and 2+2 processing voltage connections. Each channel has two L/0 connections and one ZP connection. The input signal is connected via a separate shunt rod TY801. Shunt rods are used to select voltage and current inputs. The maximum rated voltage is 50V and the maximum rated current is 2A.

MTU assigns two Module buses, one for each I/0 module and the other MTU. It also generates the correct I/O module address by transferring the output position signal to the next MTU. It has a mechanical lock that locks the MTU to the DIN rail

Four mechanical keys, two for each I/0 module, are used to configure MTU for different types of I/0 modules. This is a mechanical configuration only and does not affect the functionality of the MTU or 1/0 module. Each key has six locations and a total of 36 different configurations.

Characteristics and advantages

The I/O module is installed using a dual-wire connection and onsite power distribution.

Up to 8 channels of field signal and process power connections

Connect to the two Module By and /o modules

Mechanical keying prevents the insertion of incorrect I/O modules

Latching device for DIN rail for grounding.

DIN rail mounting

UFC911B108 ABB 是一个AO处理可编程控制模块