GE DS3800HAFA1B1D 电阻器 用于将电路板固定在驱动器中

GE DS3800HAFA1B1D 电阻器 用于将电路板固定在驱动器中

产品描述

GE稳压板DS3800HAFA1B1D具有用于连接到驱动器的模块化连接器和固定杆，用于将电路板固定在驱动器中。GE 稳压板DS3800HAFA1B1D还装有 11 个跳线和 4 个微调电阻器组件。该板还具有 1 个 20 针连接器和 1 个 34 针连接器。

在某些情况下，必须调整填充电路板的电阻器，以使电路板更兼容驱动器配置。也就是说，与驱动器中安装的电路板和其他设备的组合兼容。如果是这种情况，电路板上的微调电阻器非常有用，因为它们使技术人员能够调整电阻。技术人员应咨询现场操作人员和工程师，以确定现场的处理需求。然后，使用测试设备测量要调整的电路的信号。使用螺丝刀调整微调电阻器。调整信号时，一个可选步骤是将液体滴在螺钉上，使其变硬并防止螺钉意外转动。使用不会损坏微调电阻器的液体，如果需要更多调整，可以剥离。如果将主板从 1 个驱动器中卸下并安装在另一个驱动器中，则可能会发生这种情况。

微调电阻器也称为微调电位器，因为它们用作电位计。当电路板从工厂运抵时，微调电位器会调整为标准电阻，以满足大多数驱动器的需求。在产品测试期间在工厂进行调整。

GE DS3800HAFA1B1D 电阻器 用于将电路板固定在驱动器中
Product description

The GE pressure stabilizer DS3800HAFA1B1D has a modular connector for connection to the driver and a retainer rod for securing the circuit board in the driver. The GE pressure stabilizer DS3800HAFA1B1D also has 11 jumpers and 4 trimmer resistor assemblies. The board also has a 20-pin connector and a 34-pin connector.

In some cases, the resistors that fill the board must be adjusted to make the board more compatible with the driver configuration. That is, compatible with a combination of circuit boards and other devices installed in the driver. If this is the case, trimmer resistors on the circuit board are very useful because they enable technicians to adjust the resistance. Technicians should consult with field operators and engineers to determine the processing needs of the site. Test equipment is then used to measure the signal of the circuit to be adjusted. Use a screwdriver to adjust and fine-tune the resistor. When adjusting the signal, an optional step is to drop liquid on the screw to harden it and prevent the screw from turning accidentally. Use a liquid that will not damage the trimmer resistor and can be stripped if more adjustments are needed. This can happen if the motherboard is removed from 1 drive and installed in another drive.

Trimmer resistors are also called trimmer potentiometers because they are used as potentiometers. When the board arrives from the factory, the trimmer potentiometer is adjusted to a standard resistor to meet the needs of most drives. Make adjustments at the factory during product testing.

GE DS3800HAFA1B1D 电阻器 用于将电路板固定在驱动器中

ABB DCS    ABB CPU模块 DSPC-170 57310001-GL/7 控制板 DSPC170 库存    ABB 83SR04E-E GJR2390200R1211    电源 电子模块
ABB DCS    ABB CPU模块 PM860AK01 控制器单元 3BSE066495R1 PM 860AK01    ABB A GJR5253000R0100    机器人控制系统备件
ABB DCS    ABB DSAI155 热电偶模块 57120001-HZ DSAI-155 输入板    ABB GJR5252711P4    热电阻 电源模块
ABB DCS    ABB DSAI155A 带涂层 热电偶模块 3BSE014162R1 DSAI 155A    Abb GJR5240100R107    IO/DO模块
ABB DCS    ABB DSAO110A 输出模块 57160001-K/3 DSAO-110A PLC板卡    ABB GJR5251300R0101 07KT93D    热电偶 电源模块
ABB DCS    DSDI146 3BSE007949R1 ABB模拟输入单元 31 通道 电源模块    ABB 07KT97F1 GJR5253000R0100    启动器
ABB DCS    DSAX110A ABB模拟输入/输出板 DSAX-110A 3BSE018291R1 I/O模块    ABB GJR5251400R0202 07DC91C    PLC变频器
ABB DCS    ABB DSAX110 I/O模块 57120001-PC 输入输出模块 DSAX-110    ABB XS326A-E GJR2 2946 00    通道数字输入