GE DS3800HAIC1D1C 稳压板 2 个微调电阻器组件
产品描述
GE稳压板DS3800HAIC1D1C具有用于连接到驱动器的模块化连接器和用于将板固定在驱动器中的固定杆。GE 稳压板DS3800HAIC1D1C还装有 9 个跳线和 2 个微调电阻器组件。该板还具有 1 个 20 针连接器和多个测试点。
模块化连接器位于电路板底部,设计用于连接到电路板机架后部的匹配连接器。连接后,连接器可提供为电路板供电所需的电流。模块化连接器还使该板能够接收其他板传输的信号。该板也通过模块化连接器传输信号。连接器必须完全就位,以便完成所有电源和信号连接。为此,请用 2 只手握住电路板的侧面并将其与电路板机架对齐。确保在将电路板滑入机架时,它不会撞到电路板上的任何组件。还要防止电路板刮到机架上。用拇指将电路板轻轻按入模块化连接器,固定杆将就位以固定电路板。按下固定杆,将主板锁定在机架中。此时,模块化连接器已完全就位,电源和信号连接完成。
安装电路板后,您可以将任何带状电缆连接到 2 个 20 针连接器。将带状电缆上的连接器压入板上的连接器。
GE DS3800HAIC1D1C 稳压板 2 个微调电阻器组件
Product description
The GE pressure stabilizer DS3800HAIC1D1C has a modular connector for connecting to the drive and a retaining rod for securing the board to the drive. The GE pressure stabilizer DS3800HAIC1D1C also has nine jumpers and two trimmer resistor assemblies. The board also features a 20-pin connector and multiple test points.
The modular connector is located on the bottom of the board and is designed to connect to the matching connector at the back of the board rack. When connected, the connector provides the current needed to power the board. Modular connectors also enable the board to receive signals transmitted by other boards. The board also transmits signals via modular connectors. Connectors must be fully in place to complete all power and signal connections. To do this, hold the side of the board with two hands and align it with the board rack. Make sure that when sliding the board into the rack, it does not bump into any components on the board. Also prevent circuit boards from scraping onto the rack. Gently press the board into the modular connector with your thumb and the retaining rod will be in place to secure the board. Press the retaining rod to lock the motherboard in the rack. At this point, the modular connector is fully in place, and the power and signal connections are complete.
After the board is installed, you can connect any ribbon cable to the 2 20-pin connectors. Press the connector on the ribbon cable into the connector on the plate.
GE DS3800HAIC1D1C 稳压板 2 个微调电阻器组件
ABB DCS ABB CPU模块 DSPC-170 57310001-GL/7 控制板 DSPC170 库存 ABB 83SR04E-E GJR2390200R1211 电源 电子模块
ABB DCS ABB CPU模块 PM860AK01 控制器单元 3BSE066495R1 PM 860AK01 ABB A GJR5253000R0100 机器人控制系统备件
ABB DCS ABB DSAI155 热电偶模块 57120001-HZ DSAI-155 输入板 ABB GJR5252711P4 热电阻 电源模块
ABB DCS ABB DSAI155A 带涂层 热电偶模块 3BSE014162R1 DSAI 155A Abb GJR5240100R107 IO/DO模块
ABB DCS ABB DSAO110A 输出模块 57160001-K/3 DSAO-110A PLC板卡 ABB GJR5251300R0101 07KT93D 热电偶 电源模块
ABB DCS DSDI146 3BSE007949R1 ABB模拟输入单元 31 通道 电源模块 ABB 07KT97F1 GJR5253000R0100 启动器
ABB DCS DSAX110A ABB模拟输入/输出板 DSAX-110A 3BSE018291R1 I/O模块 ABB GJR5251400R0202 07DC91C PLC变频器
ABB DCS ABB DSAX110 I/O模块 57120001-PC 输入输出模块 DSAX-110 ABB XS326A-E GJR2 2946 00 通道数字输入