GE DS3800HPLA1A1B 面板接口板的子卡 有 3 个红色 LED 指示灯

GE DS3800HPLA1A1B 面板接口板的子卡 有 3 个红色 LED 指示灯

产品描述

GE面板接口板DS3800HPLA1A1B设计用于快速安装在驱动器中。该板的每个角都有 1 个孔。电路板可以用螺丝固定。该板上嵌入了 1 个 40 引脚连接器。GE面板接口板DS3800HPLA1A1B子卡还装有3个红色LED指示灯。该板还装有 2 个用于电可擦除可编程只读存储器 （EEPROM） 模块的插槽、7 个跳线和 2 个微调电阻器。

连接到 GE 面板接口板的子卡DS3800HPLA1A1B装有 3 个红色 LED 指示灯。当 LED 熄灭时，表示电路板上没有发生任何活动。如果电路板断电或电路板未接收到信号，则可能会发生这种情况。这也可能意味着电路板没有发送信号。检查连接到板上 20 针连接器的带状电缆。断开驱动器的电源并断开带状电缆。然后，对齐连接器并小心地将其插入连接器。恢复驱动器的电源，并检查红色指示灯 LED 指示的处理活动。如果 LED 指示灯闪烁，则表示正在进行处理。每个 LED 指示 1 个电路上发生的活动。当电路板运行时，操作员可以看到 LED。

当电路板在启动时首 次通电时，LED 亮起以指示它们正常工作。3 秒后，LED 熄灭，标准处理开始。

GE DS3800HPLA1A1B 面板接口板的子卡 有 3 个红色 LED 指示灯

Product description

The GE panel interface board DS3800HPLA1A1B is designed for quick installation in drives. Each corner of the plate has a hole. The circuit board can be secured with screws. A 40-pin connector is embedded on the board. The GE panel interface board DS3800HPLA1A1B subcard is also equipped with three red LED indicators. The board also has two slots for electrically erasable programmable read-only memory (EEPROM) modules, seven jumpers, and two trimmer resistors.

The subcard DS3800HPLA1A1B connected to the GE panel interface board is equipped with three red LED indicators. When the LED goes out, it means that no activity is happening on the board. This can happen if the board loses power or the board does not receive a signal. It could also mean that the board is not sending a signal. Check the ribbon cable that connects to the 20-pin connector on the board. Disconnect the power supply from the driver and disconnect the ribbon cable. Then, align the connector and carefully insert it into the connector. Restore power to the drive and check the red indicator LED for processing activity. If the LED indicator blinks, processing is in progress. Each LED indicates the activity occurring on 1 circuit. When the board is running, the operator can see the LED.

When the board is first powered on at startup, leds light up to indicate that they are working properly. After 3 seconds, the LED goes out and standard processing begins.

GE DS3800HPLA1A1B 面板接口板的子卡 有 3 个红色 LED 指示灯

PLC模块，可编程控制器，CPU模块，IO模块，DO模块，AI模块，DI模块，网通信模块，
以太网模块，运动控制模块，模拟量输入模块，模拟量输出模块，数字输入模块，数字输出
模块，冗余模块，电源模块，继电器输出模块，继电器输入模块，处理器模块

主要产品

PLC：Allen Bradley ControlLogix，ABB DCS 800xA 模块，

GE FANUC、施耐德电气Modicon Quantum、和利时

DCS：霍尼韦尔TDC3000 CC-PDOB01，西门子MOORE，

Foxboro、Ovation、YOKOGAWA CP451-10、Emerson Epro

ESD：Invensys Triconex、HIMA DCS、本特利内华达 3500

监控系统 3500/42，ICS Triplex，伍德沃德 9907-164