GE DS3800HPRB1C1C 脉冲速率输入板

GE  DS3800HPRB1C1C  脉冲速率输入板

产品描述

GE脉搏率输入板DS3800HPRB1C1C设计用于快速安装在驱动器中。该板的一端有一个模块化连接器，另一端有一个固定杆。GE 脉冲速率输入板DS1HPRB3800C1C还装有 1 个跳线和 12 个微调电阻器。该板还装有 1 个可编程中断控制器、多个可编程间隔定时器器件和多个电容器。

微调电阻器是一个有价值的组件，它使您能够调整GE脉冲速率输入板DS3800HPRB1C1C的行为。该板上装有许多无法调整的电阻器。它们被设计用于执行功能，不需要调整。但是，微调电阻器可以通过位于组件上的小螺钉进行调整。只有合格的安装人员才能调整微调电阻器。这是为了避免调整产生不良结果，并确保电路板的正常运行。

安装人员必须手头有功能齐全的测试设备。探头必须处于良好的工作状态，并且绝缘层没有缺失或磨损。探头还必须设计为与测试设备一起使用。用小一字螺丝刀调整螺钉，直到测试仪上显示所需的结果。在某些情况下，在螺钉上滴上特殊的胶水很有用。胶水变硬并防止螺钉转动。如果您需要重新调整螺丝，胶水会干净地剥落。

GE  DS3800HPRB1C1C  脉冲速率输入板

Product description

The GE Pulse rate tablet DS3800HPRB1C1C is designed for quick installation in drives. The board has a modular connector at one end and a fixed rod at the other end. The GE pulse rate input board DS1HPRB3800C1C is also equipped with 1 jumper and 12 trimmer resistors. The board is also equipped with a programmable interrupt controller, multiple programmable interval timer devices and multiple capacitors.

The trimmer resistor is a valuable component that enables you to adjust the behavior of the GE pulse rate input board DS3800HPRB1C1C. The board is equipped with a number of resistors that cannot be adjusted. They are designed to perform functions and do not require adjustments. However, the trimmer resistor can be adjusted by small screws located on the component. Only qualified installers can adjust the trimmer resistor. This is to avoid adverse results from adjustments and to ensure the normal operation of the board.

Installers must have fully functional test equipment on hand. The probe must be in good working order and have no missing or worn insulation. Probes must also be designed for use with test equipment. Adjust the screw with a small flat-head screwdriver until the desired result is displayed on the tester. In some cases, it is useful to drop special glue on the screw. The glue hardens and prevents the screw from turning. If you need to readjust the screws, the glue will peel off cleanly.

GE  DS3800HPRB1C1C  脉冲速率输入板

PLC模块，可编程控制器，CPU模块，IO模块，DO模块，AI模块，DI模块，网通信模块，
以太网模块，运动控制模块，模拟量输入模块，模拟量输出模块，数字输入模块，数字输出
模块，冗余模块，电源模块，继电器输出模块，继电器输入模块，处理器模块

主要产品

PLC：Allen Bradley ControlLogix，ABB DCS 800xA 模块，

GE FANUC、施耐德电气Modicon Quantum、和利时

DCS：霍尼韦尔TDC3000 CC-PDOB01，西门子MOORE，

Foxboro、Ovation、YOKOGAWA CP451-10、Emerson Epro

ESD：Invensys Triconex、HIMA DCS、本特利内华达 3500

监控系统 3500/42，ICS Triplex，伍德沃德 9907-164