GE DS3800HRRA1C1 涡轮调节器电路板 8 个复位拨动开关

GE DS3800HRRA1C1 涡轮调节器电路板 8 个复位拨动开关

产品描述

GE继电器输出板DS3800HRRA1C1设计用于快速安装在驱动器中。该板的一端有一个模块化连接器，另一端有一个固定杆。该板配有 1 个红色 LED 指示灯和 8 个复位拨动开关。模/数转换器是嵌入在电路板上的元件。它将模拟信号转换为数字格式。数字格式用于整个驱动器的信号处理。GE 继电器输出板DS1HRRA3800C1还装有 1 个琥珀色指示灯 LED。

GE继电器输出板DS3800HRRA1C1安装在驱动器中，在维修人员或技术人员可以安全地维修或更换电路板之前，必须进行多次安全检查。在开始任务之前，维修人员必须检查驱动器周围的地板是否受潮。如果地板受潮，它会导电并引起触电。为防止这种情况发生，请擦干地板上的所有水分。如果存在水坑，请确保地板完全干燥。如果潮湿是反复出现的情况，请考虑在房间内放置除湿机以干燥空气，从而减少冷凝。

如果地板上沾满了油或油脂，zui好清洁地板。使用清洁剂清洁地板，在地板清洁干燥之前不要继续。如果发生紧急情况，光滑的地板可能会阻止快速行动，从而防止严重伤害。

GE DS3800HRRA1C1 涡轮调节器电路板 8 个复位拨动开关
Product description

The GE relay output board DS3800HRRA1C1 is designed for quick installation in the drive. The board has a modular connector at one end and a fixed rod at the other end. The board is equipped with a red LED indicator and 8 reset toggle switches. An A/D converter is a component embedded on a circuit board. It converts analog signals into a digital format. The digital format is used for signal processing throughout the drive. The GE relay output board DS1HRRA3800C1 is also equipped with an amber indicator LED.

The GE relay output board DS3800HRRA1C1 is installed in the drive and must undergo several safety checks before a service person or technician can safely repair or replace the board. Before starting the task, maintenance personnel must check the floor around the drive for moisture. If the floor is damp, it will conduct electricity and cause an electric shock. To prevent this from happening, dry all moisture from the floor. If there are puddles, make sure the floor is completely dry. If moisture is a recurring condition, consider placing a dehumidifier in the room to dry the air and thus reduce condensation.

If the floor is covered with oil or grease, it is best to clean the floor. Use a cleaner to clean the floor and do not continue until the floor is clean and dry. In the event of an emergency, a smooth floor may prevent quick action, thereby preventing serious injury.

GE DS3800HRRA1C1 涡轮调节器电路板 8 个复位拨动开关
型号推荐
8312 康吉森    Triconex DCS    功率模块
8110 康吉森    Triconex DCS    底盘高密度主10A 120 VD
4000056-006 康吉森    Triconex DCS    电缆
4000094-310 康吉森    Triconex DCS    电缆
9651-110 康吉森    Triconex DCS    控制板终端
3664 康吉森    Triconex DCS    双输出模块
3503E 康吉森    Triconex DCS    通信模块
3004 康吉森    Triconex DCS    模拟输出模块
9674-810 康吉森    Triconex DCS    控制板终止
9853-610 康吉森    Triconex DCS    控制板终端
9753-110 康吉森    Triconex DCS    控制板终端
9771-210 康吉森    Triconex DCS    控制板终止
9761-210 康吉森    Triconex DCS    外部控制板终止