F3331 HIMA输出系统模块DCS应用

F3331 HIMA输出系统模块DCS应用

F33315V DC电源不必单独接线，因为它是准备作为子机架的一部分安装。
CPU需要5V直流电源、接口控制以及I/O模块。它由时钟24 V DC/5VDC电源产生带有F7130A标识的模块。

F3331子机架配备两个电源模块。电源模块并联。如果其中一个失败，另—个提供PES。电源模块的5VDC输出电压(对于CPU,I/O和接口)在中央单元检查下进行监控电压或故障。

如果电源模块出现故障，操作系统将提供用户的程序通过具有此信息的系统变量。如果5VDC系统电源发生故障，硬件时钟和sRAM上的中央模块由锂电池缓冲，锂电池也位于CEN上特拉尔模块。
 

F3331 HIMA输出系统模块DCS应用
The F33315V DC power supply does not have to be wired separately as it is ready to be installed as part of the sub-rack.
The CPU requires 5V DC power supply, interface control, and I/O modules. It is generated by a clock 24 VDC /5VDC power supply with a module bearing the F7130A logo.

The F3331 sub-rack is equipped with two power modules. Power modules are connected in parallel. If one fails, the other provides PES. The 5VDC output voltage of the PSU (for cpus,I/O, and interfaces) is monitored for voltage or failure under the central unit check.
If the power module fails, the operating system will provide the user's program through a system variable with this information. In the event of a 5VDC system power failure, the hardware clock and the central module on the sRAM are buffered by a lithium battery, which is also located in the Teral module on the CEN.

F3331 HIMA输出系统模块DCS应用

型号推荐
IS200ERRBG1A    GE Fanuc    通用电气燃机卡件
IS200EROCHIA    GE Fanuc    通用电气燃机卡件
IS200TBAIH1A    GE Fanuc    控制卡件
IS200TBAIH1B    GE Fanuc    控制卡件
IS200TBCIH1BCE    GE Fanuc    通用电气模块
IS200TBCIH1BCD    GE Fanuc    通用电气燃机卡件
IS200TBCIH1BBC    GE Fanuc    通用电气燃机卡件
IS200TBCIH2B    GE Fanuc    通用电气燃机卡件
IS200TBCIH2C    GE Fanuc    通用电气模块
IS200TBTCH1BAA    GE Fanuc    通用电气模块
DS200TCCAF1BDF    GE Fanuc    模拟输入模块
DS200TCCAF1BDE    GE Fanuc    控制卡件