TRICONEX 3603E工控系统系列产品卡件模块

TRICONEX 3603E工控系统系列产品卡件模块

TRICONEX 3603E 可编程控制系统通讯卡件拍摄共享详情参数MP控制器采用三个独立通道，每个通道与另外二个通道并行独立执行应用程序，对从现场来得所有数字量输入/输出信号采用通过获得的硬件表决器进行表决，而模拟信号则是中间值选择处理。

因为每个通道与其他通道隔离，任何通道单点故障不会影响其他通道。如果一个通道发生硬件故障，而其他通道不顾及它。在此期间控制器不间断处理的情况下，可方便地在线插拔和替换故障模块。TRICONEX系统，完全遵循IEC61508/61511标准，采用当今的TMR微处理器硬件技术，和成熟可靠的TRISTATION 1131软件的三重化冗余容错控制系统。

系统高可靠性和高利用率，被广应用于石化、炼油、石油天然气、化工、电力、轨道交通、航天、核工业等行业，在装置安全联锁系统ESD、蒸汽透平控制、燃汽透平控制、压缩机防喘振控制、海上石油平台、火气监测保护（F&G）、等方面有广的业绩。

TRICONEX系统大的特点是能同时满足高可靠性、高可用性的容错控制能力。为系统的高可靠性和高可用性，控制器、I/O模块、通讯均采用三重化设计。

控制系统可以识别控制系统元件的故障，自动把故障的元件加以排除，并允许在继续完成任务的同时，对故障元件进行在线修复而不中断过程的操作。任何故障及相关数据被存储在NVRAM中，在I/O模块中任一通道故障，系统该模块能维持运行1500小时，仍能满足TUV AK6级。

The TRICONEX 3603E programmable control system communication card shot sharing details Parameters The MP controller adopts three independent channels, each channel executes the application independently in parallel with the other two channels, and votes on all digital input/output signals from the field through the obtained hardware vote, while the analog signal is the intermediate value selection processing.

Because each channel is isolated from the others, a single point of failure of any channel does not affect the others. If one channel has a hardware failure and the other channels don't take care of it. During this period, the faulty module can be easily inserted, removed, and replaced online without interruption of the controller processing. The TRICONEX system, fully compliant with IEC61508/61511 standards, uses today's TMR microprocessor hardware technology and the proven TRISTATION 1131 software for triple redundancy fault-tolerant control.

The system has high reliability and high utilization rate, and is widely used in petrochemical, oil refining, oil and gas, chemical industry, electric power, rail transit, aerospace, nuclear industry and other industries. It has wide achievements in ESD, steam turbine control, gas turbine control, compressor anti-surge control, offshore oil platform, fire gas monitoring and protection (F&G), etc.

The TRICONEX system is characterized by fault-tolerant control capabilities that simultaneously meet high reliability and high availability. For the high reliability and high availability of the system, the controller, I/O module and communication are triple designed.

The control system can identify the fault of the control system component, automatically eliminate the faulty component, and allow the fault component to be repaired online without interrupting the operation of the process while continuing to complete the task. Any faults and related data are stored in NVRAM, and if any channel in the I/O module fails, the system can maintain 1500 hours of operation and still meet the TUV AK6 level.