TRICONEX 3507E工控系统系列产品卡件模块
TRICON系统安装注意事项
1、安装前检查设备外观良好,无变形、破损、油漆脱落、受潮、锈蚀等缺陷。
2、焊接速度、时间、压力等参数可调;
3、牵引工位具备中断定位功能,精度要求±0.5mm,保证生产效率及准确性。
4、贴胶装置可同时贴4道胶,可同时开启两个超焊工位,需要选择性开关;
5、不同工位报警功能:材放卷断带报警、中途断带报警、极耳断带报警、收卷片材报警、涂布错位报警、极耳漏焊报警、上下贴胶真空报警等
6、要求PLC控制,HMI操作,方便易用。
Precautions for TRICON system installation
1, check the appearance of the equipment before installation, no deformation, damage, paint off, moisture, rust and other defects.
2, welding speed, time, pressure and other parameters can be adjusted;
3, traction station with interrupt positioning function, accuracy requirements ±0.5mm, to ensure production efficiency and accuracy.
4, the glue device can be pasted at the same time 4 glue, can be opened at the same time two super welder positions, the need for selective switch;
5, different station alarm function: material unwinding broken tape alarm, midway broken tape alarm, pole ear broken tape alarm, winding sheet alarm, coating misalignment alarm, pole ear leakage welding alarm, upper and lower glue vacuum alarm
6, require PLC control, HMI operation, easy to use.